Natsolv AQ - Industrial Citrus Degreaser

1 litre degreaser, 5 litre degreaser, 25 litre degreaser, 205 litre degreaser, 1000 litre degreaser

Natsolv is an extremely powerful citrus based industrial degreaser, it utilises the natural terpenes found in oranges to quickly and effectively break down stains and oils. A little Natsolv goes a long way and should be diluted with water to give the appropriate strength for any job


Step 1 – Apply the Natsolv to the contamination using a mop, brush, wipe, spray or as a dip.

Step 2 – Increased contact time will allow the Natsolv to break down the contaminant, we recommend waiting between 5-15 minutes depending on the type and extent of contamination.

Step 3 – Work into resistant soiling with a broom, brush, scrubber etc. to help remove the contaminant.

Step 4 – Rinse the area with water to remove the contaminant and any excess Natsolv, collect and dispose of the wash water in line with legal requirements.

Repeat all steps as necessary - multi-stage cleaning may be necessary on ingrained contamination and will gradually reduce residues.

natsolv application from spray bottle 15 minute clock broom silhouette bottle pour silhouette

Benefits of Natsolv Degreaser

  • Suitable for a wide variety of uses and application methods
  • Breaks down a large range of common contaminants
  • Effective for cleaning of most surfaces
  • Suitable for manual use or use through machinery
  • Leaves a pleasant citrus fragrance
  • pH neutral
  • Concentrated formula is dilutable to suit purpose
  • Available in a range of strengths dependant on planned usage
  • Available from 5 litres up to 1,000 litres
  • Non corrosive
  • Not a skin irritant (sensible precautions should be observed gloves are recommended to prevent degreasing skin)
  • Non flammable
  • VOC free


Suitable for:

Manual usage: This aqueous degreaser can be used across most industries and work environments to clean floors, walls, glass, worktops, kitchen surfaces, garages, machinery, equipment, and vehicles.

Parts washers: Natsolv can be used as a high effective degreaser through parts washers.

Dip Cleaning: Dip cleaning in suitable baths would allow for extended contact time to break down ingrained dirt and debris.

Machinery: Natsolv can be used through a range of industrial machinery designed for use with aqueous cleaners such as jet washers, road sweepers, steamers and floor cleaning machinery (including carpet cleaners).

Common Compatible Surfaces

This product does not adversely affect metals (dry manually to avoid rusting), ceramics, concrete, brick, composite plastics, acrylics, wood, glass, fabrics, carpets, kitchen surfaces or upholstery. Care should be taken with rubber (seals etc.) For heavy duty grade, please contact your supplier for a Seal Compatibility Sheet.

Common Contaminants

Natsolv can be used to break down a vast range of contamination including diesel, petrol, tar, grease, carbon, waxes, animal fats, vegetable oil, gear oil, adhesives, bitumen, HFO, orimulsion, circuit board flux, uncured paint, varnish and oil based paint, medium gravity oils (hydraulic, engine etc.).

The above listings are by no means complete and are only a guideline to the versatility of the active ingredients.

Recommended usage and dilution rates

Natsolv comes in 3 concentrations and all 3 can be diluted to the appropriate strength for any job.

We recommend efficacy testing the product at different dilutions to find a strength proportionate to your needs.

For surfaces which are unlikely to be damaged by the Natsolv (e.g. hard surfaces) start with a neat solution and dilute down until the product becomes ineffective.This will identify the most economic concentration for repeated usage.

For surfaces which may be damaged by the Natsolv (e.g. carpets) we recommend starting with a very dilute solution and adding concentrate to find a strength which provides adequate cleaning power without damaging the substrate.

Typical uses for Industrial Strength Natsolv: Removal of light industrial soils, removal of iridescence, removal of slip hazards (flushing with water required), general industrial cleaning (floors etc.).

Typical uses for Heavy Duty Industrial Strength Natsolv: Cleaning of heavy industrial soils, cleaning recent oil contamination, dip cleaning parts.

Typical uses for Ultra Duty Industrial Strength Natsolv: Removal of ingrained dirt and debris, removal of wax and fat build ups, cleaning of heavy oils.


Available in sizes of:

  • 1 litre
  • 5 litres
  • 25 litres
  • 205 litres
  • 1000 litres

Available in concentrations of:

  • Industrial Strength
  • Industrial Strength - Heavy Duty
  • Industrial Strength - Ultra Duty

“We’ve been using Natsolv for the past 10 years and find it extremely effective at cleaning up a range of stains and spillages, and it works very well through machinery. For us it’s the best product on the market”

Highways Superintendent

County Council

Need advice for services and products? Call us now 01656 741 799

Geo Pollution Technologies (UK) LTD - company number - 04689357


GPT head office is based in South Wales and covers all areas of South Wales, West Wales and Mid Wales including Cardiff, Swansea, Bridgend, Newport, Port Talbot, Powys, Llanelli, Neath, Pembrokeshire and Aberystwyth.

We also cover the South West of England from our premesis in Exeter including Cornwall, Devon, Taunton, Redruth, Truro, St Austell, Falmouth, New quay, Torquay, Paignton, Bristol, Plymouth, Bath, Gloucester and Somerset, .

We also operate across the midlands, London, Birmingham, Leicester, Northampton, Derby, Stoke, Nottingham, Coventry, Liverpool, Worcester, Southampton, Swindon, Manchester, Sheffield, Slough, Heathrow, Leatherhead and Surrey.